Publicación pausada

en 10 cuotas de sin interés

Publicación pausada

Vendido por EAVALLE

No tiene suficientes ventas para evaluar su atención

Características del producto

Características principales

Marca
Openvox
Modelo
A2410P

Descripción

DECOMISO DE ADUANA REMATADO JUDICIALMENTE
¡Como comprar en el exterior, pero sin riesgo de aduana ni demoras!
APROVECHE ESTE PRECIO INFERIOR AL DE ORIGEN !!!

Producto OPENVOX A2410P: Tarjeta PCI, full length, en caja. Acepta hasta 24 lineas FXO / FXS, agregando los módulos openvox en la propia tarjeta.


Información Original:

OpenVox AE2410P/E takes full advantage of Octasic® Hardware Echo Cancellation Module to deliver the superior voice quality on both FXO and FXS interfaces in all 24 ports.

Adjustable Interrupt Routing Design
Interrupts frequency adjustment
Up to 24 Simultaneous PSTN Calls (Per PCI Slot)
Compatible with All Commercially Available Motherboards
Octasic® Hardware Echo Cancellation Module Available


Overview

AE2410P/E is a new generation analog card with Octasic® Hardware Echo Cancellation Module on board. With the interchangeable quad-FXS and quad-FXO modules, AE2410P can eliminate the requirement for separate channel banks or access gateways.

Once the Octasic® DSP module EC2032 is added to the AE2410P/E, please make sure you are ready to say goodbye to the poor voice quality and echo echo echo in your phone system. No one will even get a chance to hear that any more! The AE2410P with Octasic DSP module will support Telco-grade hardware echo cancellation on all channels, up to the card’s maximum configuration in 24 ports with no additional CPU load.

AE2410P/E works with Asterisk®, Elastix®, FreeSWITCH™, PBX in a Flash, trixbox®, Yate™ and IPPBX/IVR projects as well as other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway applications.


Target Applications

Channel Bank Replacement / Alternative
Small Office Home Office (SOHO) applications
Small and Medium Business (SMB) applications
Gateway Termination to analog telephones/lines


Services And Features

Caller ID and Call Waiting Caller ID
ADSI Telephones
Loopstart Signaling Support


Technical Specifications

Up to 24 ports through a combination of FXS400 and FXO400 modules
Full-length analog card
Up to 6 quad FXS or FXO modules
RJ45 connector
32-bit 33MHz PCI and fully PCI 2.3 compliant, compatible with all commercially available motherboards, and proper sharing of PCI interrupts
32 bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec
Autosense compatibility with 5 V and 3.3 V PCI busses compatible
FPGA design, upgradeable firmware onsite
Power: 8.21W Minimum, 88.24W Maximum at 3.3 V or 5 V.
Operation temperature: 0°C to 50 °C
Storage temperature: -40°C to 125°C
Size: 31.1*9.8*1.8cm
Weight: 175g
Optional Octasic® DSP Echo Cancellation Module — EC2032

1024 taps/128 ms tail/channel (on all channel densities)
Octasic® music protection
Automatic level control (G.169)
Field upgradeable algorithm
V.25 / V.8 answer tone
DTMF as per Q.24
No CPU load as a result of echo cancellation.
Does not increase the physical size of the card, and no additional slot is required
EC2032 (SMEC V1.1) power: 3.83W


Operating Systems

Linux (all versions, releases and distributions from 1.0 up)


Minimum Hardware Requirement

800-Mhz Pentium III
128MB RAM
Available PCI Slot
1 FXS400 or 1 FXO Module


NO ACEPTO PERMUTAS
ATIENDO GENERALMENTE EN HORARIO DE OFICINA, DÍAS HÁBILES
ENVÍOS A TODO EL PAÍS (comprador paga envío en destino)